Crosswords0 min ago
Fusty Smell From Overflow
15 Answers
My bathroom basin has a very narrow overflow ( too narrow to get a brush in ) and it smells terribly fusty/mouldy. I have only had that basin for a year. I have tried bathroom-cleaner-aerosol and also loo-cleaner, to no avail.
Should I squirt neat bleach down it, or is there anything better ?
Should I squirt neat bleach down it, or is there anything better ?
Answers
Best Answer
No best answer has yet been selected by atalanta. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Cillit Bang bathroom spray foam is awesome - It will knock the socks off anything nasty in the overflow - just make sure you ventilate your bathroom well for a bit and keep any pets you have away as it's strong stuff and you will need to leave it for a few minutes before rinsing off (used it on my bathroom tiles and it worked a treat)
-- answer removed --
Maybe this will work better…
http:// www.ins tructab les.com /id/Unc log-bat hroom-s ink-wit hout-ch emicals /
http://
The basin is right up against the wall. The space behind will not take anything near the size of a bucket. There is no S-bend - more a sort of pipe junction like a letter T on its side. The whole lot is almost completely encased in the ceramic stand of the washbasin, which encloses it on 3 sides. I can't even see round it, let alone reach round with tools - there simply isn't room.
Oddly enough, the old basin was there for 30 years and never ponged at all.
And no, I never let the basin overflow throug that space.
Oddly enough, the old basin was there for 30 years and never ponged at all.
And no, I never let the basin overflow throug that space.
I have to agree with Motherrr....because my father had a similar problem in two sinks and it was caused by slimy black mould growths inside both the overflows...nothing to do with the U-bend. The kitchen overflow was easy to dismantle and clean out....smell gone. The bathroom sink overflow is part of the sink....so a thin, flexible test-tube brush and thick chlorine bleach were used - result, no smell. Absolutely nothing wrong down at the U-bend end of things!
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.