Quizzes & Puzzles1 min ago
Electrical Problem
7 Answers
I recently unplugged a kettle and found the socket I unplugged it from had burn / scorch marks around the "live" hole on the mains socket. The kettle works fine. What's likely to have caused this & do I need an electrician?
Answers
1 to 7 of 7
Best Answer
No best answer has yet been selected by dibble1. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
If all is well with the kettle and the kettle plug and you have not been consistantly using a high power user in the socket then I would assume something wrong with the socket, loose connection inside or the live part of the socket too slack to make proper connection with the plug.
If you are not familiar with electrics and your post suggests not then find an electrician.
If you are not familiar with electrics and your post suggests not then find an electrician.
Replacing a sockets is easy:
1. Go to Screwfix or similar to buy a new socket. (They're cheap!)
2. Turn the power off.
3. Unscrew the two screws holding the old socket in and pull it away from the wall.
4. Unscrew the screws holding the wires in,remove the socket and throw it in the bin.
5. Connect the wires to the correct terminals of the new socket. (It should be obvious as to which way round they go but there will be a leaflet with the socket to help out if you're in doubt).
6. Push the new socket into place.
7. Spend ruddy ages getting the retaining screws to locate into the holes they're meant to fit in. (I hate that bit!)
8. Turn the power back on.
9. Pour yourself a large drink.
10. Consume said drink.
1. Go to Screwfix or similar to buy a new socket. (They're cheap!)
2. Turn the power off.
3. Unscrew the two screws holding the old socket in and pull it away from the wall.
4. Unscrew the screws holding the wires in,remove the socket and throw it in the bin.
5. Connect the wires to the correct terminals of the new socket. (It should be obvious as to which way round they go but there will be a leaflet with the socket to help out if you're in doubt).
6. Push the new socket into place.
7. Spend ruddy ages getting the retaining screws to locate into the holes they're meant to fit in. (I hate that bit!)
8. Turn the power back on.
9. Pour yourself a large drink.
10. Consume said drink.
If you're not completely comfortable with electricity but want to try changing the socket then I'd recommend you buy the same make of socket as the one already fitted. Following Buenchico's instructions you'll have no problems but different makes of socket have the cable connections in different positions and it might be awkward getting the wires to go in the right holes.
1 to 7 of 7
