Donate SIGN UP

tezestwing

181 to 200 of 390

First Previous 7 8 9 10 11 12 13 Next Last

Avatar Image
tezestwing
have seen so many offers but what are the real prices for a car MOT now TIA Tez
Avatar Image
coke71
we have a new condenser boiler and have been told to set the boiler temperature for the heating to maximum and alter the room thermostat accordingly. does anyone know if this is the most efficient and...
Avatar Image
graemescott
i need to replace my hot water tank, how do ido this?
Avatar Image
bushbaby_de
Hi everyone, this is kind of long-winded so thanks for reading and hope someone can help. I'm not sure which bits are relevant so I added it all in! I live in a first floor flat with a cold water tank...
Avatar Image
claybury
a friend has moved to a house with old sash windows, they will not close properly but leave about a 2 inch gap on closing. at the top. is there anything that can be done to release them for proper...
Avatar Image
bugler
what size loft tank would I need to feed a standard hot water cylinder
Avatar Image
J.JJ
can anybody direct me to a website which shows the configuration for a central heating system, that comprises a radiator located on the indirect hot water loop controlled by a programmer such as a...
Avatar Image
sweety36
Does it cost any more money to have all radiators switched on as to just have 1 on?
Avatar Image
jackieo
I live end of terrace and notice that rooms with outside wall are damp when it rains...discovered cracks in the rendering on outside wall and notice a house down the road has dug out cracks on...
Avatar Image
lollyone
Just about to embark on this task and wondered if anyone knew the easiest and quickest way to get them off. Everyone says it an awful job and just wondered if anyone had any tips. Thanks.
Avatar Image
the-richards
Hi, We recently had our nasty fire and back boiler removed and the tradesman who did it filled the hole in the chimney breast with breezeblocks and plastered over it. He has left a small hole in the...
Avatar Image
beanebabe
We have a radiator in the bathroom that has an integral towel rail. It is getting hot at the bottom, but is cold at the top. It obviously needs bleeding. There is not a valve at the top that you can...
Avatar Image
SSSid
I am making a wooden mould to cast a concrete feature in my garden. I dont want to buy gallons of commercial release agent for a couple of castings. Is there some readily available product that will...
Avatar Image
tezestwing
I have got so many quotes all with different clauses limitations excces etc any recomendations on what to look out for or companies to use thanks for any replies Tez
Avatar Image
Whoever
After using my washing machine in its Spin mode this morning I was disconerted to discover what looked like either smoke or steam coming out of the open door when I removed the washing. I've never...
Avatar Image
james_king
Hi, I hope someone can shed some light on this as it is driving me insane ! I have fitted a ceiling fan/light in my conservatory and after a few hours of the fan being turned on it has stopped...
Avatar Image
Mully79
Hello, clueless DIYer here... I've noticed over the last few months that a couple of holes have appeared in the lining below the tiles on the roof. It's kind of a tarpaulin material (sorry I'm not...
Avatar Image
tezestwing
why do I now have to sign in just to browse posts and answers, I only needed to before if I wanted to contribute to a post or is there a gremlin in my PC thanks for any replies Tez
Avatar Image
CAJ1
Me and my boyfriend are going to Crete in August for 2 weeks. We both agreed to arrange a day out each and suprise the other person when we get there. Any ideas of what I could do or where to take...
Avatar Image
Remeboy
Hi There, I have a troublesome Toilet Cistern which requires a replacement syphon unit, at my local DIY store, they no longer stock the usual units and instead offer a replacement which seems to be a...

181 to 200 of 390

First Previous 7 8 9 10 11 12 13 Next Last