Crosswords2 mins ago
Plasma won't work as a display for my laptop ...?
2 Answers
In the past I have been able to use my plasma tv as a display for my laptop with relative ease. Basically I just connect it up via a vga cord and hit Fn/F4 which shoots the image up to the plasma.
Each time you hit Fn/F4 it kind of scrolls through having the picture on both the laptop and plasma then to just having it on the plasma and finally to just having it on the laptop.
When the picture is on both the laptop AND plasma and you try and open a video file - the video file window (windows media player for example) will open and sound will work (assuming that is also connected properly) but the video will remain black.
To fix this I just keep hitting Fn/F4 till the picture is fully on the plasma and now when I play the video file it plays both sound and video perfectly.
Here is where it gets interesting...
My flatmate hooked his laptop up to the plasma in a similar fashion but he has a more modern computer and it automatically detected the new plasma without having to press Fn/F4 or any other combination of buttons.
He can play video just fine.
This is where it gets wierd...
Now when I tried to connect my laptop as I have always done and press Fn/F4 it still scrolls through the various combinations of display but when it gets to fully being on the plasma the entire screen just goes black.
It will show the shared version of plasma and laptop and do the whole sound but no vision thing for video files but it won't completely utilize the plasma screen and thus play the video files properly.
That's wierd right?
Any help would be greatly appreciated.
Pete.
Each time you hit Fn/F4 it kind of scrolls through having the picture on both the laptop and plasma then to just having it on the plasma and finally to just having it on the laptop.
When the picture is on both the laptop AND plasma and you try and open a video file - the video file window (windows media player for example) will open and sound will work (assuming that is also connected properly) but the video will remain black.
To fix this I just keep hitting Fn/F4 till the picture is fully on the plasma and now when I play the video file it plays both sound and video perfectly.
Here is where it gets interesting...
My flatmate hooked his laptop up to the plasma in a similar fashion but he has a more modern computer and it automatically detected the new plasma without having to press Fn/F4 or any other combination of buttons.
He can play video just fine.
This is where it gets wierd...
Now when I tried to connect my laptop as I have always done and press Fn/F4 it still scrolls through the various combinations of display but when it gets to fully being on the plasma the entire screen just goes black.
It will show the shared version of plasma and laptop and do the whole sound but no vision thing for video files but it won't completely utilize the plasma screen and thus play the video files properly.
That's wierd right?
Any help would be greatly appreciated.
Pete.
Answers
1 to 2 of 2
Best Answer
No best answer has yet been selected by arthurbach4. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
[Deep breath]
I've had this problem before when hooking up laptops to data projectors, some data projectors and screens will not produce the video clip say of a dvd film as a result of the laptops video display making up the image to the laptop screen only.
There may be a different video mode or driver that could be downloaded to run the plasma screen correctly but don't rely on this as most companies don't offer them.
You could try fine tuning the resolution on the graphics driver properties of the laptop so that the screen output is lower, most tv's can cope with not much more than 800x600 anyhow.
You may just have to use something like nero to burn viodeo clips to disks so you can use them on a dvd player through the plasma tv.
However I've had cases where the soldering on the socket to main board where the vga lead connects on the back of the laptop has deteriorated over time and will not display image on screen and no matter what driver/projector/time spent pressing keys to cycle through modes there is still no picture on the screen.
I've had this problem before when hooking up laptops to data projectors, some data projectors and screens will not produce the video clip say of a dvd film as a result of the laptops video display making up the image to the laptop screen only.
There may be a different video mode or driver that could be downloaded to run the plasma screen correctly but don't rely on this as most companies don't offer them.
You could try fine tuning the resolution on the graphics driver properties of the laptop so that the screen output is lower, most tv's can cope with not much more than 800x600 anyhow.
You may just have to use something like nero to burn viodeo clips to disks so you can use them on a dvd player through the plasma tv.
However I've had cases where the soldering on the socket to main board where the vga lead connects on the back of the laptop has deteriorated over time and will not display image on screen and no matter what driver/projector/time spent pressing keys to cycle through modes there is still no picture on the screen.
Aunsoft Video Converter helps you convert between various formats. It is the must-have conversion tool for video lovers, and enables you to enjoy movies on computer, to further edit video for creation, to present video on HDTV, and to publish video online in web-friendly format. You can control your video and music on popular portable devices including iPad, Nexus One, HTC Hero, Zune, iPod, PSP, Apple TV, iPhone anytime anywhere.
1 to 2 of 2
Latest Posts
ChatterBank3 mins ago
If You Protest You Must Be Mentally Ill.
News5 mins ago
Quizzes & Puzzles7 mins ago
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.