Donate SIGN UP

new lever taps in kitchen

Avatar Image
Old Salt | 18:34 Wed 23rd Mar 2011 | How it Works
11 Answers
My old taps simply wore out. So I got someone I know to purchase and install a new set of lever taps in the kitchen.

They look nice, but the shutoff of water flow seems to me to be totally unacceptable. However, the man who installed them has been doing work for me for a very long time and I have never found him lacking.

He tells me that modern taps tend to run for a bit after being turned off; sometimes up to 30 seconds before completely shutting off the water flow. I have no reason to doubt him, but I suspect he is simply saying what the people at the stroe told him.

The spout is shaped like a square question mark -- 12" up, 8" horizontal and a 3" drop down.

I told him I would see how I feel after a week or so; but, I just don't like to see so much water being wasted. It runs-on, albeit at a very reduced rate, for a good 15 to 20 seconds.

I would very much like to hear from anyone who knows about these things.

Thank you for any response

Old Salt
Gravatar

Answers

1 to 11 of 11rss feed

Best Answer

No best answer has yet been selected by Old Salt. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
I have lever taps in my bathroom, they switch off straight away. I think he's spinning you a yarn.
-- answer removed --
Question Author
Same here boxtops,

My bath and my basin lever taps work straight away.

Thanks for the response

OS
Not a plumber but this does sound iffy. Surely the only way water will come out is with gravity, namely the bit of the tap facing down. For more to come out, especially for that long, it would need pressure behind, and turning off the tap is supposed to stop that pressure.
Question Author
My sentiments exactly, Postdog

I think my initial concern is well founded, based on the responses so far,

OS
There will be a dribble from the spout .. but pressure should be gone straight away.
I presume they are 'ceramic' valves?
I am with AlBags here. Do you know if the taps are ceramic? From fully open to shut how much does the lever move? If it is about one quarter of a circle(90°) then they are very likely to be ceramic and should not be the way you describe.
I have lever taps in my kitchen with a large question mark spout.............mine shut off immediately.
Question Author
Thanks everybody,

Your responses has now convinced me. I shall give the man a call and let him know that it is not acceptable. I didn't want it to come to this, but the taps just aren't right.

OS
I had the same problem with my kitchen taps, they are mixer taps with an upside down "J" shaped spout, when first installed there was a 5 second trickle of water after the handle was turned off, it was annoying at first because they cost a lot of money but eventually it stopped and now as soon as you turn the handle it stops
Question Author
So there is hope, Elvis68?

Last night I informed the man that I could not live with the taps as they were. He is going to check with the manufacturer and then we will discuss what to do............

I shall certainly keep in mind you experience, as I really don't want the disruption that comes with changing them, unless it is absolutley necessary.

You make me remember a long, long, long time ago, when I rushed out and bought a pair of blue suede shoes with chartreuse, alternating with heliotrope, laces (depended on how I was feeling)

OS

1 to 11 of 11rss feed

Do you know the answer?

new lever taps in kitchen

Answer Question >>