Quizzes & Puzzles46 mins ago
Persistent Scan Disk Routine After Replacing Memory Cards.
5 Answers
Greetings each.
I recently replaced the memory cards on an E-Machines 3210 PC running XP-Pro: Upgraded from 2 x 256mb to 2 x 512mb.
Each time I boot-up since then, Windows runs Scandisk and checkdisk on C: and gives me the option to stop this by pressing any key.
I let it do it a couple of times and it went through the sequence without finding any irregularities although didn't continue with boot sequence; thus meaning I had to switch-off manually, restart and the whole sequence would happen all over again.
If I skip the checkdisk etc the machine boots-up and functions normally.
Can someone please tell me the reason for this and how I can prevent it as it is starting to annoy me.
Be good!
Cheers.
I recently replaced the memory cards on an E-Machines 3210 PC running XP-Pro: Upgraded from 2 x 256mb to 2 x 512mb.
Each time I boot-up since then, Windows runs Scandisk and checkdisk on C: and gives me the option to stop this by pressing any key.
I let it do it a couple of times and it went through the sequence without finding any irregularities although didn't continue with boot sequence; thus meaning I had to switch-off manually, restart and the whole sequence would happen all over again.
If I skip the checkdisk etc the machine boots-up and functions normally.
Can someone please tell me the reason for this and how I can prevent it as it is starting to annoy me.
Be good!
Cheers.
Answers
Best Answer
No best answer has yet been selected by squidgelet10. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Hopefully this info will sort your issue, assuming is the same problem:
http:// forums. techguy .org/wi ndows-x p/98695 5-solve d-const ant-sca ndisk-s tartup. html
Note the link discusses a D: drive fix. You should use C: instead.
Hope it works for you.
http://
Note the link discusses a D: drive fix. You should use C: instead.
Hope it works for you.
Unsure why this started when you changed memory but to me it suggests that Windows suspects a problem with the C: drive. Does the problem go away if you run a check & fix app on it ? In Explorer right click on C:, select properties, tools tab, Error Checking, Check Now. IIRC Windows uses a bit of a crude method for fixing drives though. Youmay wish to download something better.
Greetings each.
I tried the remedy suggested by "Old_Geezer" first as it seemed easier. I thank you for that, Sir!
Check Disk took all morning and eventually ground to a halt at around lunchtime, which is when I took the screen pic which is available here:
http:// www.the atreorg ans.com /beerwu rly/squ idgelet 10.jpg .
It now appears I have a disk problem as the ruddy thing refuses to boot-up at all!
I will try a repair job using the installation CD BUT, if all else fails I will re-install Windows XP. I have nothing to lose as there was nothing saved on the PC in the first place.
Watch this space, as they say.
Stay good!
Cheers.
I tried the remedy suggested by "Old_Geezer" first as it seemed easier. I thank you for that, Sir!
Check Disk took all morning and eventually ground to a halt at around lunchtime, which is when I took the screen pic which is available here:
http://
It now appears I have a disk problem as the ruddy thing refuses to boot-up at all!
I will try a repair job using the installation CD BUT, if all else fails I will re-install Windows XP. I have nothing to lose as there was nothing saved on the PC in the first place.
Watch this space, as they say.
Stay good!
Cheers.
Greetings Old Chap.
I removed the drive after my last posting and tried to read it on another machine but the other comp declared it U/S and refused to read it: The big problem is that I had all the drivers in My Documents! I am now faced with the same problem I had when I asked an earlier question:
http:// www.the answerb ank.co. uk/Tech nology/ Compute rs/Ques tion119 2652.ht ml : I am once again having probs with the VGA graphics card drivers. "Chuck Fickens" came up with a solution on that occasion, but now the link he gave me has no effect whatsoever! :-( Gawd knows why? It's the same machine.
Be good!
Cheers.
I removed the drive after my last posting and tried to read it on another machine but the other comp declared it U/S and refused to read it: The big problem is that I had all the drivers in My Documents! I am now faced with the same problem I had when I asked an earlier question:
http://
Be good!
Cheers.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.