my washing machine wont fill with water

TcDouglass | 15:02 Thu 18th Aug 2011 | DIY

4 Answers

Hi,

Don't know if anyone can help, Ive got a HotPoint washing machine and it won't fill with water. There is 3 red lights flashing.
Ive tried to turn it off at the switch and removed and cleaned the filter but had no luck.
Anyone got any ideas?

Thanks, Tracey

covering kitchen worktops

How to get at the motor on a Hoover U3485 PurePower

Answers

1 to 4 of 4

Best Answer

No best answer has yet been selected by TcDouglass. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

scotman

Does the manual tell you what the 3 lights mean?

TcDouglass

Question Author

Yeah that the filter is blocked, but its not, had it out twice.

vallaw

Is there a filter in the hosepipe?

tommy-h

Indeed there is usually a filter on the input hose.disconnect the machine from electric pull it out unscew feed hose(s) and make sure they are clean.Surprising how much gunk gets into the water supply even these days.This should be done annualy only takes 10 mins or so.hope this works if not feel about above filter I once pulled a sock from my aunts machine think it was hotpoint too.

1 to 4 of 4

Do you know the answer?