What Can I Give My Dog For Tooth Pain?
Animals & Nature1 min ago
Electric shower plumbing problem
My husband is replacing a shower supposed to be like for like but the new shower has a plastic inlet pipe. Instructions say to use a compression unit. However the copper pipe has a flexible hose which connects it at present to the shower unit. How can we use a compression unit to attach the hose to the plastic inlet pipe?
Answers
1 to 6 of 6
Best Answer
No best answer has yet been selected by genthon. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Is the flexible pipe from the existing pipework one of those flexible things - often silvery colour, sort of plaited outside?
This is a pretty clear explanation of copper to plastic: http://www.polypipe.c...n-other-materials.jsp
But you may need to think about how the flexi end finishes off - you might need to add a short length of copper that you can then attach to the plastic.
This is a pretty clear explanation of copper to plastic: http://www.polypipe.c...n-other-materials.jsp
But you may need to think about how the flexi end finishes off - you might need to add a short length of copper that you can then attach to the plastic.
I think from your description there is a compression joint between the metal piping of the old shower and the existing pipework.
I think you look through the link gave you it covers all the eventualities - what I generally do is buy a range of compression joint options and see which one is best for the task as I find it hard to remember the details. hen I take back the ones I haven't used for a refund. Works with B&Q, anyway.
Seriously, you're going to have to read thriugh the guides and work out what you need as it's practically impossible this way. But I think it's the case that 'compression unit' means 'compression joint'.
I think you look through the link gave you it covers all the eventualities - what I generally do is buy a range of compression joint options and see which one is best for the task as I find it hard to remember the details. hen I take back the ones I haven't used for a refund. Works with B&Q, anyway.
Seriously, you're going to have to read thriugh the guides and work out what you need as it's practically impossible this way. But I think it's the case that 'compression unit' means 'compression joint'.
It sounds as though the old shower had a 1/2-inch spigot (just like a tap - where it connects to the pipework.) So, I guess your flexible is a braided flexible tap connector.
You can convert the end to a compression fitting, but it's not going to look too good sticking out of the shower unit. I would be inclined to replace your flexible with one that has a compression joint at both ends.
You can convert the end to a compression fitting, but it's not going to look too good sticking out of the shower unit. I would be inclined to replace your flexible with one that has a compression joint at both ends.
1 to 6 of 6
