Washing Machine Drum Is Not Turning

[tali1]

My Beko washing machine drum is not turning .Having done all the simple tests, it seems that the brushes have gone according to online info
Is this a DIY job ? a friend of mine did his and said it is very awkward and ball bearings can cause problem.

[DJHawkes]

they are 2 black rubber oblong things that are quite fiddley to slide out and in again but i can do it,

[Sycamore3House]

Look up a video on You Tube to guide you and I am sure you would be able to do it yourself and save yourself some money. It cost me £7.54 to mend my tumble dryer 3 years ago (it is still working now) by following You Tube.

[douglas9401]

Is the drive belt in place?

[tali1]

thanks
@methyl
it is beko wma1614
Machine has been drained and hoses and ports checked they are all fine.The belt is is good condition
Machine pulls and drains water.The motor is only heard on spin setting

[mjwman]

Brushes. I have changed on my Bosch, and Hoptoints previously.
Very easy once the motor is out.
On the Bosh it is at the bottom so inverting the machine and unbolting is easy. On the old Hotpoint it was on top so just had to take the lid off and unbolt the motor.
You will find that there is a simple plug to the motor then remove it then the 2 brushes are accessible and oly bclipped in. Easy Peasy!
Espares is an excellent scource of parts and much cheaper than appointed service outlets.

[EDDIE51]

If the motor runs on spin it is not the brushes , if they were gone the motor would not run at all .
Most probable is the drive belt has snapped or just come off there are 2 belts on some machines .one from the motor itself to a pulley and one around the drum from the pulley.

[tali1]

Brushes were very worn and one had lost it's casing-wonder if that pinpoints fault?
Brushes changed still not work
afaik only 1 belt