Treating New Oak Veneered Doors

[countrykid]

I have just had two new oak veneered interior doors fitted. I'd like to retain their natural appearances if possible and do not want to use a varnish. I am aware that the door manufacturer recommends against using Bees Wax or oils, due I think to this affecting the doors moisture content. However, a quick google search found many other people asking much the same question as me, and there were many answers suggesting Osmo door oil as being perfect for the job. Has anyone on this site used that product, and does anyone know if it is the same or similar to Danish Oil which I used years ago on wood and found that to give a pleasant, satin look finish, which is what we want to achieve. It was also really easy to apply using a cloth rather for greater control and no runs, rather than a brush. Any other suggested products considered. I suspect that the door manufacturer is playing safe to avoid any claims if the door subsequently twists or warps. I have emailed them for their advice, but had no reply!! Thanks in advance

[The Builder]

Kid, manufacturers today employ some many caveats and get-outs. I think they'd prefer (or at least their lawyers do), that you buy the product, but don't actually use it. ;o)

It largely depends on the thickness and quality of the veneer. I've fitted some horrors in the past, that were simply a chipboard core with a "photograph" of a tree glued to it..........

If you have a decent thickness, then go for "finishing oil" such as Danish. A good oak veneer needs very little treatment. Not much more than a wipe with an oily cloth every few months. It's tempting to use a brush, but that gives far too much build-up. Oil isn't like paint. It should never have any "thickness" as such.