How To Cut Angled Moulding

kloofnek | 15:42 Thu 31st Jul 2014 | DIY

10 Answers

Answers

1 to 10 of 10

Best Answer

No best answer has yet been selected by kloofnek. Once a best answer has been selected, it will be shown here.

tonyav

I would use a saw with the finest teeth I could find, a jig saw probably.

Question Author

Thank you Toni...that is what I did think about doing but wanted to be sure,will I be able to sandpaper the cut part to smooth it?

tonyav

Yes Kloofnek, the finest grade of paper you can find or you could use some very fine wet and dry paper.

Question Author

Thanks..."wet and dry paper"??

It's an abrasive paper you can use when wet or when dry

Question Author

Thank you Geezer.

Given it is plastic you may find a sharp blade gets rid of burs easier than filing or sandpapering. Try one method, if not happy, try another.

tonyav

You'll get a smoother finish if you keep the wet and dry paper wet.

Question Author

Will try both as suggested ,many thanks

Use a guide jig and a hacksaw with a 32 tpi blade.

1 to 10 of 10

Do you know the answer?