Film, Media & TV2 mins ago
Compact Central Heating Radiator.
Hi,
I work in a residential house and they have compact central heating radiators fitted throughout the property. The house was built around about 1994, so these radiators were put in almost twenty two years ago. I just wondered what the lifespan of these particular radiators is? Quite recently we had to have one of the radiators replaced, and the output from this radiator is much better than the old radiators. Anybody have any knowledge in regards to how long these radiators usually last?
Many Thanks,
Zubar.
I work in a residential house and they have compact central heating radiators fitted throughout the property. The house was built around about 1994, so these radiators were put in almost twenty two years ago. I just wondered what the lifespan of these particular radiators is? Quite recently we had to have one of the radiators replaced, and the output from this radiator is much better than the old radiators. Anybody have any knowledge in regards to how long these radiators usually last?
Many Thanks,
Zubar.
Answers
Best Answer
No best answer has yet been selected by Zubar. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Apart from actual leaks from the radiator caused by internal rusting creating pin hole leaks and leaks caused by poor seals where the valves are connected to the radiator , the only other faults that affect radiators are :-
1) If the radiator is cold along at the top , then air has dissipated from the water in the system and accumulated in the top portion of the radiator and the radiators need bleeding to release this air and the central heating system needs re-pressurising. The central heating is most efficient when the pump is pumping around non-compressible hot water, when air separates from the water in the system due to heating the water, the water is non-compressible but the air can be compressed by the pump, this situation makes the pump very inefficient and the heating system becomes virtually useless.
Radiators should be bled as and when required and the system re-pressurised to compensate for the volume of air released by this process.
2) If the top of the radiator is hot and the bottom part of the radiator is cold, then the system is full of gunge and the radiator cannot function correctly. The central heating system will need to be power flushed to remove the grunge and silt clogging the system as the pump will not be able to efficiently pump the hot water around the radiator network, this is a job best left to specialists.
1) If the radiator is cold along at the top , then air has dissipated from the water in the system and accumulated in the top portion of the radiator and the radiators need bleeding to release this air and the central heating system needs re-pressurising. The central heating is most efficient when the pump is pumping around non-compressible hot water, when air separates from the water in the system due to heating the water, the water is non-compressible but the air can be compressed by the pump, this situation makes the pump very inefficient and the heating system becomes virtually useless.
Radiators should be bled as and when required and the system re-pressurised to compensate for the volume of air released by this process.
2) If the top of the radiator is hot and the bottom part of the radiator is cold, then the system is full of gunge and the radiator cannot function correctly. The central heating system will need to be power flushed to remove the grunge and silt clogging the system as the pump will not be able to efficiently pump the hot water around the radiator network, this is a job best left to specialists.