ChatterBank4 mins ago
Weather Station Not Displaying Outdoor Temperature.
9 Answers
Techno line WS9130-IT
Batteries died in the outdoor temperature part, so I replaced them, whilst I was at it I replaced the ones in the indoor bit too.
Followed the set up procedure as described in this link to manual....
http:// www.tec hnoline -berlin .de/man ual/402 9665091 303_EN. pdf
Indoor temp is displaying, as is the forecast, but cannot get the outdoor temp to display at all. No low battery indication light showing.
Anyone can shed any light please ?
Batteries died in the outdoor temperature part, so I replaced them, whilst I was at it I replaced the ones in the indoor bit too.
Followed the set up procedure as described in this link to manual....
http://
Indoor temp is displaying, as is the forecast, but cannot get the outdoor temp to display at all. No low battery indication light showing.
Anyone can shed any light please ?
Answers
Best Answer
No best answer has yet been selected by ferlew. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Are you sure you followed the set-up procedure properly? The timing between putting the batteries in the outdoor sensor and indoor sensor seems to be critical. Tryagain; just remove 1 battery from each with them sitting side by side. Replace the battery in the outside sender, immediately followed by the one in the indoor receiver. Then leave the two sitting side by side for a few minutes.
Hi Ferlew,
I had exactly the same problem with the one I bought my daughter last Xmas.
I e-mailed the seller, and here is the reply.
Hello,
please try to put out batteries in the main station and in the transmitter for 12 hours. Then put them back, first in the transmitter, then in the main station.
If this will not help, please contact us again.
Thank you.
==
Did this solve your problem?
If yes, click here:
http:// www.ama zon.co. uk/gp/h elp/sur vey?p=A 15ZN9CM 08J4WF& amp;k=h y&r ef_=bsm _hmdyes _pt
It didnt, so replied back, and they have sent a new one, and daughter sent the old one back.
Hope this helps.
I had exactly the same problem with the one I bought my daughter last Xmas.
I e-mailed the seller, and here is the reply.
Hello,
please try to put out batteries in the main station and in the transmitter for 12 hours. Then put them back, first in the transmitter, then in the main station.
If this will not help, please contact us again.
Thank you.
==
Did this solve your problem?
If yes, click here:
http://
It didnt, so replied back, and they have sent a new one, and daughter sent the old one back.
Hope this helps.
Just another thought - one of my earlier weather stations had a switch whereby you could select different sensors. This enabled you to have up to 3 sensors in different locations and look at the temperature of each location. Does your receiver have such a switch and has it got changed to point to a non-existent sensor?
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.