Crosswords0 min ago
Combi boiler or conventional?
Answers
No best answer has yet been selected by David1158. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Hi David,
For once the salesman is telling the truth,if a joint is a little bit loose it could make it leak slightly,you will also find that tap washers might need replacing after a little while,the another down side to a combi is that you lose the hot water cylinder,so if the boiler ever goes wrong you won't have an immersion heater as back up for your hot water, hope this helps you,Ray
David, There are many things to be taken into consideration when deciding what type of system will be best for you, including the valid points that Ray has made.
The only part of the system that will be under mains pressure ( that was not before ) ,if you choose a combi will be the pipework to, and including, the hot draw-offs. The rest of the system will be set to approximately 1 bar pressure,( if you change to a "sealed system " ). You will not have a cylinder / immersion heater as back up, but most combi manufacturers now offer at least a 2 year guarantee with a same day / next day call-out.
Advantages of having a combi are that you are not paying to heat up water in the cylinder that you may not use, also the cupboard where the cylinder was sited can be put to other uses.
May I suggest that as your financial outlay will be quite substancial whichever system you decide upon, that you acquire 3 quotes from reputable heating installers, along with their advice, and make your selection from these.
Hope this helps.