faulty shower

[skyeish]

Shower has been working well since installation 9 months ago. Shower now only runs cold.
The indicator light on the pull on/off switch does not light up. Could this be the problem or will the shower itself have to be taken apart?

[gselectrical]

If the shower is a manual one ie you have to turn the flow valve to activate the shower it is more than likley a supply problem either fuse or in the d.p switch a faulty connection if its a push button start (solonoid) correct supply will be present and fault will be the cut out activated

[dave m]

defo a electrical supply prob,if yor fuse hasnt tripped its prob a loose wire in yor pull switch

[skyeish]

It's skyeish here again - regarding faulty shower. I have checked the fuse, ok, opened up pull cord switch unit, couldn't see any loose wiring. Having put it back together the indicator light now comes on though. The shower is then activated by pressing a button on the shower unit. Water still runs only cold. Does anyone have an answer

[tommy.h]

loose connection possibly at the switch, try removing fuse & check screw connections at switch.