Society & Culture2 mins ago
Plumbing in shower tray without detachable sides?
3 Answers
how is this done please?
Answers
Best Answer
No best answer has yet been selected by Im a BusyBee. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Shower traps may be accessed for cleaning through the 'hole'. Low shower trays may require a hole in the floorboard through which the bottom of the shower trap fits. I accept that this means limited access, but how often does one need to get at these things - once they are proven watertight?
The solution really depends on where the 40mm outlet pipe is located (running along the edge of the room in boxing or below the floor between the joists).
The solution really depends on where the 40mm outlet pipe is located (running along the edge of the room in boxing or below the floor between the joists).
recently had the same problem, only answer to it apart from major work is to build a wooden plinth/false floor high enough to give clearance for the waste pipe, just gives a step up into the shower area.
As the tray i fitted was the opposite side of the room to the waste i built a false floor the full width of the room.
It needs to be well built so as to not allow any movement of the tray, i also fitted the floor section in 2 parts to enable me to do the plumbing
As the tray i fitted was the opposite side of the room to the waste i built a false floor the full width of the room.
It needs to be well built so as to not allow any movement of the tray, i also fitted the floor section in 2 parts to enable me to do the plumbing
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.