Bannister Rail Paint Peeling Off

[MargoTester]

I rubbed it down and repainted but its happened again. Rubbed it down again but some still remains. Can anyone suggest the best way to get rid of this please. I read some that it's best to use an oil based paint, but I need to remove the residual paint flakes. I've tried white spirit and soapy water. Your help would be appreciated.

[The Builder]

Laboriously stripping back to original timer will do it Margot.

However........... Zinsser products are probably the best alternative.
I've always used "Zinsser Bulls-Eye" or "1-2-3-" from the same company.
This may be even better............

Amazon.com User Recommendation

[The Builder]

^^^^ "timber"

[The Builder]

What I like about it is that it forms a tough acrylic coating.
Also, it's breathable. Most flaking is the result of evaporation from under the paint not being able to escape subsequent layers of paint.

[MargoTester]

Thanks Builder. I've read about that but it's quite expensive for the small amount I would use and I wondered if

[MargoTester]

Oops - there was an alternative. Looks like l'll have to bite the bullet and buy some. Thanks for your help.

[pastafreak]

I used Zinsser on some of my trim downstairs...it was brilliant. Wish I'd used it when I did my stair spindles a few months ago.
Well worth it.
I also used this on some skirting board...very easy to use and quick drying...opinions The Builder?

Amazon.co.uk User Recommendation

[The Builder]

I know, Margot. It's a common complaint.
But, the paint industry is very sophisticated today. The "old days" have gone.
9 or 10 pounds a litre is not exceptional. For some wood finishes, I often pay £70 for 5 litre cans. (£14 per litre.)

[The Builder]

I don't know that one Pasta, but at that price, I would be inclined to go for it.
What you're really paying for are the "one-coat" properties.
There are cheaper ways to do it.

With the Zinsser products though, they are well proven :o)

[MargoTester]

Thank you both very much.