The Answers Are All Prisons 14.12.2024
Quizzes & Puzzles1 min ago
Wall Insulation
i have a 3 bed semi with no cavity walls. have read about inner wall insulation and outer wall insulation, does anyone have info about these products? i,m complete novice regarding this and any advice would be greatly appreciated
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by bethbilly. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
So many ways to do this, Beth. Here are possibly the simplest methods...
Interior face of external walls:
Fix battens (timber) to the wall, fix foam (board) type insulation between battens, then plasterboard and conventional skim plaster.
There are other things to consider, but that's the short version.
Exterior face of exterior walls:
Much the same - except - instead of plasterboard, fix galvanised expanded metal lath, then render and paint.
I think you can see that the interior solution can be a simple diy job. Only one room at a time is disrupted.
The external solution involves scaffolding, having sufficient roof overhang (soffit), detail around windows etc etc.
It's not so much a question of special products, more a conventional approach that doesn't involve ......... "specialist" companies/ "surveyors"/ mystique/ fancy prices.
A specification and a decent local builder is all you need.
Have a think about those approaches first.
Interior face of external walls:
Fix battens (timber) to the wall, fix foam (board) type insulation between battens, then plasterboard and conventional skim plaster.
There are other things to consider, but that's the short version.
Exterior face of exterior walls:
Much the same - except - instead of plasterboard, fix galvanised expanded metal lath, then render and paint.
I think you can see that the interior solution can be a simple diy job. Only one room at a time is disrupted.
The external solution involves scaffolding, having sufficient roof overhang (soffit), detail around windows etc etc.
It's not so much a question of special products, more a conventional approach that doesn't involve ......... "specialist" companies/ "surveyors"/ mystique/ fancy prices.
A specification and a decent local builder is all you need.
Have a think about those approaches first.
Only 1 answer
