need to join together bits of 30mm worktop - I know biscuits would be best - but not available - will screw and drill - what is best adhesive to use?

[TonyV]

Enter Further Question Details Here...

[The Builder]

These are often used for butt joints, Tony..............

http://www.screwfix.c...50mm-pack-of-10/15295

Polyurethane wood glue is the favourite these days. You need to dig out recesses for the clamps to go into.

[TonyV]

The Builder - do not have enough room to route them in - only extending witdth by 3 or 4 " = but will use sash cramps - if i can scrounge some - poly seems the way to go

[The Builder]

Only 3 or 4 inches? Just glue and sash clamps then definitely

http://www.screwfix.c...-adhesive-310ml/40778

[TonyV]

The Builder - got hold some evo stick poly - cadged the sash cramps - will give it a go in the morning - thanks for advice

[The Builder]

Go for it Tony :o)

[TonyV]

The Builder - nothing against you but evo - stick poly I bought had already gone off - problem was that I had wetted joints before I cut nozzle. Think there might be a problem with shelf life with this product??? Ended using grip fill - lol