Quizzes & Puzzles0 min ago
Wood Table Heat Marks
11 Answers
how are they removed
Answers
Post #1 has the solution. After thorough sanding, maybe try Yacht Varnish. Two coats, leave 2-3 days between coats and then sand before applying the top coat. Ps. If it's minor damage perhaps try covering the bad patch with thick brown paper and ironing it. Be quick (not thorough) because you won't see the result for a few minutes.
01:07 Thu 03rd Jan 2013
I had an idea it was the cloudy varnish :o(
I'd like to see if there are any simple household remedies. I guess it would be easier for me to scrape the varnish off completely with a cabinet scraper, and re-finish it.
A cabinet scraper can even be a wood-plane blade. Any straight blade in fact, which is pulled towards you to take the layers of varnish off.
A perfect job, but some hard work though :o(
I'd like to see if there are any simple household remedies. I guess it would be easier for me to scrape the varnish off completely with a cabinet scraper, and re-finish it.
A cabinet scraper can even be a wood-plane blade. Any straight blade in fact, which is pulled towards you to take the layers of varnish off.
A perfect job, but some hard work though :o(
Take your pick:
Mix 50/50 toothpaste and baking soda, rub in. Do not use gel toothpaste for this.
Rub in a paste of salt and olive oil, allow to sit for up to an hour. Wipe off.
Rub in Miracle Whip (Mayonnaise) and wipe off after an hour.
Mix 50/50 vinegar and olive oil and rub into the watermark.
Try straight toothpaste (non-gel). Rub in with the grain then wipe off.
Make a paste with baking soda and a few drops of water. Rub in then wipe off. You can also try salt instead of baking soda.
Rub some Vaseline (or other petroleum jelly) into the watermark and leave overnight. Wipe off in the morning.
Or, our all time favorite... a simple steam clothes iron, a clean white dish towel (dry)... set the towel on the mark, use medium high heat on iron and move in slow circular motion on towel after steam has started coming out of iron. You may have to do this two or three times to be effective...
Mix 50/50 toothpaste and baking soda, rub in. Do not use gel toothpaste for this.
Rub in a paste of salt and olive oil, allow to sit for up to an hour. Wipe off.
Rub in Miracle Whip (Mayonnaise) and wipe off after an hour.
Mix 50/50 vinegar and olive oil and rub into the watermark.
Try straight toothpaste (non-gel). Rub in with the grain then wipe off.
Make a paste with baking soda and a few drops of water. Rub in then wipe off. You can also try salt instead of baking soda.
Rub some Vaseline (or other petroleum jelly) into the watermark and leave overnight. Wipe off in the morning.
Or, our all time favorite... a simple steam clothes iron, a clean white dish towel (dry)... set the towel on the mark, use medium high heat on iron and move in slow circular motion on towel after steam has started coming out of iron. You may have to do this two or three times to be effective...
I've not read all this thread but just in case its not been mentioned....my Dad used to work for a removal company and learnt a few tricks to cover marks as you describe and scratches
Try a little Brasso gently rubbing it in a circular movement then buffing with a clean cloth should help the cloudy marks.
For light scratches a Brazil nut [they are very oily] could be gently rubbed over the scratch. I know he did this a few times at home and it seemed to work.
Try a little Brasso gently rubbing it in a circular movement then buffing with a clean cloth should help the cloudy marks.
For light scratches a Brazil nut [they are very oily] could be gently rubbed over the scratch. I know he did this a few times at home and it seemed to work.
-- answer removed --