Donate SIGN UP

Heating Not Working After Radiator Replaced

Avatar Image
callboy | 10:32 Mon 17th Jun 2013 | Interiors
10 Answers
I recently decorated the bathroom and removed the radiator,as I've done before,but when the radiator was replaced the heating was turned on to bleed the radiator but the heating is not working. It was working normally before decorating. Can anyone help with this problem?
Gravatar

Answers

1 to 10 of 10rss feed

Avatar Image
Good idea Slackers. Check that first, Callboy. Failing that, it should be something like this to fill the system . Fill to 1.5 Bar on the pressure guage...
11:27 Mon 17th Jun 2013
Need more information, Callboy...
Boiler firing up?
Other rads warming up?
Just this rad that's nor getting hot?
Pipework to this rad warm?
Question Author
the boiler fires up but then goes off again and the radiators and pipes are all cold.the pipe from the boiler gets a little warm then cools down again.Is it anything to do with not enough water in the system
Is it a combi boiler. If so has the pressure dropped? If so let more water into it.
That's a good possibility Mr Heep.
Question Author
it is a combi but I don't know how to let more water in
What's the make and model, Callboy?
Hope I am not being thick here (quite easy for me in all honesty).

You have turned up the thermostat temporarily?
Question Author
it is a worcester 28Si II
Good idea Slackers.
Check that first, Callboy. Failing that, it should be something like this to fill the system . Fill to 1.5 Bar on the pressure guage...

I called someone out a few days ago - no hot water or heating. Someone came out and simply flicked a switch on, I was so embarrassed!

Sorry, not an helpful answer callboy, but double check any basics so you don't waste money and become as humiliated as I was!

1 to 10 of 10rss feed

Do you know the answer?

Heating Not Working After Radiator Replaced

Answer Question >>

Related Questions