I Have A Bad Condensation Problem With My Plastic Garden Shed.

[triharder]

My Keter plastic shed is soaking wet inside. Everything in it is now only fit for the tip. Its built up on a timber base with damp course layer in between the base and the shed. I've sealed all the top edges of the roof with all weather silicon, but it has made no difference. Any help would be very much appreciated.
Thanks,
Wayne.

[bookbinder]

The usual answer to condensation problems is to improve ventilation. Is it possible to do that in your shed?

[tali1]

They have a 6 yr guarantee.If out of guarantee grab some mini humidifiers for a pound each.I did and no probs now - although my damp was not as bad as yours

[buildersmate]

The warranty won't cover lack of adequate ventilation, there is no suggestion water is coming in from the roof

[The Builder]

The plastic sheds usually have a grill type vent in the front gable end (pointy bit of the roof.) First make sure it's clear.

There should be another one opposite in the other gable. If there isn't, cut one in to create "crossflow" ventilation.

[tali1]

Mine was def from roof.When i phoned keter they seemed surprised - but they seemed willing -ish to help but my quick fix sorted it.

[TWR]

I have just seen your post Tri, I have an 8x6 which I put up myself, it has a Concrete base, the trouble I've with this shed is unbelievable, the tools that have gone Rusty, I contacted Keter At Birmingham along with A4 Pics of the Rust, They sent my a cheque for a £100, I have put 4 Vents into it so that with the Original totals 6, it's the worst bag of cr--p I have ever bought, regards look, it's good, I would contact Keter if I was you along with A4 Pics & seek compo, these shed are made in Israel, I had an issue with the Cross Plastic Beam leaking so they sent me a new one, the Doors Warped so I replaced them, I should have repaired the wood shed I removed, that on never give trouble except the Floor started to rot, regards keter sheds, they should stop where they get made, in Israel, he address for Keter is at the back of the Instruction book.