is there anyone who can suggest a firm that repairs fountain pens, please?
I have found a couple (can't see the name as it is writ small) but they should fill by lifting a small lever on the outside of the case. this is too stiff to move, as they were not used in latter years that it may have rotted. One of them not used as far as I can see. Are they worth the trouble?
Very good video guide to replacing the ink sac (bladder) here. Note it says the most common cause of not being able to move the refill lever is a hardened ink sac!
Also depends on the brand - I have a Mont Blanc and managed to snap it in two by my pc bag coming off the car seat sharply.....it sat there until I was in Michael Spiers one day for a refill on my biro. They told me that MB charge £70 for service and repair but if the pen was irreparable, they would replace it...that wasn't too bad in my book, a new one costing several hundred....
thanks for that link DTC. will contact them first to see. although they are marked with an M very much doubt if they are MB. probably a firm that is now out of business.
Lady-janine, I've fixed a few bladder-type fountain pens over the years. The principle operation of them are really simple, so there's nothing much that can go wrong. Just Google "Repairing fountain pens".
thanks for that info atalanta and stuey. I use a parker 51 each and every so I know how they fill but cannot move the little outside lever that operates the bladder on these. btw they are both conway stewarts with mottled/crazed cases.
nowhere appears to be open so will have to wait until the new year.
thanks to all of you for your suggestion and help. x
I always use fountain pens..unless the paper surface is unsuitable for ink...have several ..none as posh as yours DT ..have been using a parker mainly for years now..I simply flush mine in warm water every few weeks..had to use distilled water in Norwich ..but tap ok here..
I would do that to these minty but the little lever on the outside of the case that operates the bladder inside the case is too stiff to move up and down it has become stiff and unyielding I don't want to break the little levers off and so thought a professional might know the answer. I have been soaking them in tepid water with no success.
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.