ChatterBank3 mins ago
Help......need Decorating Advice
Hi, can someone give me some advice on painting a room, explained in the most simple way possible please.
I tried to paint my mom's bathroom earlier this year, three walls were a neutral colour and one was a bright feature colour. I put some tape around the edges of the other walls and ceiling first and then painted the feature wall. Then when this dried I put tape on the feature wall and painted the other walls.
The problem was when I pulled the tape off the walls I'd pained it pulled the paint off with it and ended up looking a right mess and my mom went mental.
Now I have to paint the hallway but how do you stop the paint of the wrong colour going on the wrong wall or ceiling when tape rips the paint off????
Also what type of gloss do you think I should use for the white skirting board??
I've been looking online but just don't get it can anyone explain this to someone who is not technical at all.
Thanks
Tim
I tried to paint my mom's bathroom earlier this year, three walls were a neutral colour and one was a bright feature colour. I put some tape around the edges of the other walls and ceiling first and then painted the feature wall. Then when this dried I put tape on the feature wall and painted the other walls.
The problem was when I pulled the tape off the walls I'd pained it pulled the paint off with it and ended up looking a right mess and my mom went mental.
Now I have to paint the hallway but how do you stop the paint of the wrong colour going on the wrong wall or ceiling when tape rips the paint off????
Also what type of gloss do you think I should use for the white skirting board??
I've been looking online but just don't get it can anyone explain this to someone who is not technical at all.
Thanks
Tim
Answers
Best Answer
No best answer has yet been selected by GymLadTim. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.If you must use tape then make sure it's low tack, especially on newly painted surfaces.
One here but widely available.
https:/ /www.sc rewfix. com/p/f rogtape -painte rs-deli cate-su rface-m asking- tape-41 m-x-24m m/54939
One here but widely available.
https:/
If you are not that confident I would look for a young Polish Team. They have a 'can do' attitude,good prices and good workmanship. I can't believe I just typed that but having experienced British 'fly boy' cowboys I know where to ask now. Not so long back the memsahib was a dab hand at painting/decorating. Age catches up on us :-(
I'd definitely recommend Frog tape for delicate surfaces and I have found for getting really nice edges I use a firm piece of thin perspex that you can push into corners where walls/ceilings meet and paint against, (I cut some from the type that forms the back and front of document holders with the clip on the side, pinched from work....).
I recommend one of those plastic splatter sheilds ^^^ for the straight colour joining edge. Either that or suggest the hall be all one colour.
Use satin paint for the skirting, its much easier to use and manage and gives a shiny durable finish.
Finally, if you do your best and Mom is not appreciative then you know what to tell her to do!!
Use satin paint for the skirting, its much easier to use and manage and gives a shiny durable finish.
Finally, if you do your best and Mom is not appreciative then you know what to tell her to do!!
Don't use any tape on the walls. Chances are, no matter how recent they have been plastered/painted, you will pull some of the surface off when you remove the tape. If you're using a matt emulsion, roll/brush the walls before 'cutting in'. If silk, do the 'cutting in' first.
For the 'cutting in' make sure you have a good quality brush - angled ones are superb - load it with paint and begin cutting in about 1/2 inch below the ceiling. Slowly drag the brush, and it's reservoir of paint, up to the ceiling and paint a straight line until your brush begins to run dry. Then, reload the brush, begin about 6 inches away from where you ended, and drag the brush in the opposite direction until it has overlapped your first application. Remove any extra build up of paint with your brush. Continue this procedure until you have cut in around the room. Tape the skirting boards up, ensuring that there is no tape on the wall, and cut in along the bottom of the walls. Then cut in down the corner angles either side of your feature wall - no need to be neat on the walls that do not meet the feature walls. Tried to make that sound as simple as i could; hope i succeeded.
For the 'cutting in' make sure you have a good quality brush - angled ones are superb - load it with paint and begin cutting in about 1/2 inch below the ceiling. Slowly drag the brush, and it's reservoir of paint, up to the ceiling and paint a straight line until your brush begins to run dry. Then, reload the brush, begin about 6 inches away from where you ended, and drag the brush in the opposite direction until it has overlapped your first application. Remove any extra build up of paint with your brush. Continue this procedure until you have cut in around the room. Tape the skirting boards up, ensuring that there is no tape on the wall, and cut in along the bottom of the walls. Then cut in down the corner angles either side of your feature wall - no need to be neat on the walls that do not meet the feature walls. Tried to make that sound as simple as i could; hope i succeeded.
I think it's all been said, Timbo.
Tape is difficult. Car re-sprayers have this problem even with masking tape.
I've used masking tape, but only on old stable paintwork that isn't likely to come away.
The plastic paint guards can be useful, but you need to practice.
Of course, the best way is with a top quality brush, and I mean really top quality. Most people's problems stem from using cheap brushes.
Always false economy.
Considering that it's a bathroom, there is something else you could try.
A coloured silicone sealant with the nozzle cut to a fine squirt. Apply using a simple frame gun.
Run it down the inside angle. Dip your finger in a cup of water (to stop it dragging). Then run the finger down the bead to finish.
Really good professional finish. Even the colour doesn't have to match exactly. The effect is still good.
Tape is difficult. Car re-sprayers have this problem even with masking tape.
I've used masking tape, but only on old stable paintwork that isn't likely to come away.
The plastic paint guards can be useful, but you need to practice.
Of course, the best way is with a top quality brush, and I mean really top quality. Most people's problems stem from using cheap brushes.
Always false economy.
Considering that it's a bathroom, there is something else you could try.
A coloured silicone sealant with the nozzle cut to a fine squirt. Apply using a simple frame gun.
Run it down the inside angle. Dip your finger in a cup of water (to stop it dragging). Then run the finger down the bead to finish.
Really good professional finish. Even the colour doesn't have to match exactly. The effect is still good.