Crosswords32 mins ago
Drip In My Dual Push Toilet
31 Answers
Got a drip into bowl. I'm trying to turn off water to have a look at it. I can't turn off water tap under sink in kitchen but it is tight shut. I put WD40 on but still can't turn. Shall I use a tool to listen it ? There is no tap visible in bathroom.
Answers
That, to me, looks just like the one in my link at 11:36. I use a spanner with long jaws and hold it on the tap handle like the man in the video did with the pliers; I find a spanner easier. Incidentally , you can undo the nut which the man was heating with the candle - it will not allow water to leak past it but it will allow you to get the WD40 in more easily. Hitting the...
17:01 Wed 17th Jun 2020
The first thing to do is find the place in the street where you can turn-off your water. It's likely to be about 3 feet down under a metal lid and you will need a special tool to turn it (a piece of wood with a V cut out will probably do). The first time I came to use ours it was full of sand and I had to dig down to get to the tap. Turn the water off there, check that it's really off ie, that you've found the right tap. Then, and only then, try a spanner on the one inside the house. Once you've finished the job consider replacing the stop-cock inside the house - you might need it urgently sometime.
Any good here tamaris?
https:/ /m.yout ube.com /result s?searc h_query =+drip+ in+bowl +of+dua l+flush +toilet
https:/
If it's a standard stop-cock like this one:
https:/ /www.sc rewfix. com/p/s topcock -15mm/3 1490
a spanner is safer than a hammer because it will apply torque to both arms at once.
https:/
a spanner is safer than a hammer because it will apply torque to both arms at once.
Do you mean this sort of thing?
https:/ /www.sc rewfix. com/c/h eating- plumbin g/gate- valves/ cat3830 006?cm_ sp=mana gedredi rect-_- plumbin g-_-gat evalves
They are only used on indirect water supplies as they are not completely watertight, so they are often used on toilets. I would still try to get a spanner big enough to fit the handle part. Alternatively, it might be possible to remove the handle and use a spanner on the spindle.
https:/
They are only used on indirect water supplies as they are not completely watertight, so they are often used on toilets. I would still try to get a spanner big enough to fit the handle part. Alternatively, it might be possible to remove the handle and use a spanner on the spindle.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.