Quizzes & Puzzles0 min ago
Removing Glue
11 Answers
Please can you tell me how to remove the remains of glue from sticky back velcro? It is on a door that has a wood effect coating/laminate. I pulled one piece of velcro off and unfortunately it pulled a small bit of the coating off with it, but left some of the glue still attached to the door. Many thanks in advance.
Answers
Best Answer
No best answer has yet been selected by tenrec. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Finger varnish remover should do the trick,if not Amazon have a wide range of sticky stuff removers.
https:/ /www.am azon.co .uk/s?k =sticky +stuff+ remover &ad grpid=5 4815901 002& ;gclid= EAIaIQo bChMI4Y Gxt-n86 wIVTs3t Ch3lIQC uEAAYAS AAEgLUe fD_BwE& amp;hva did=259 0480107 97& hvdev=c &hv locphy= 9046688 &hv netw=g& amp;hvq mt=e&am p;hvran d=59621 3486081 0399895 &hv targid= kwd-300 3857545 89& hydadcr =25966_ 1872056 &ta g=googh ydr-21& amp;ref =pd_sl_ 2uat3zl 1je_e
https:/
I would expect isopropyl alcohol to work very well - depending on the type of adhesive (and given that it has dried up quite a lot with age) you may to work at it. But IA works on pretty much all adhesives used with stick-on stuff/items. It is a bit tricky to get hold of in shops but you can get it on eBay. It has a multitude of uses.
Sticky Stuff Remover, from the orange bucketeers (B&Q) - £4.27 for a 250ml bottle.
Put some on a clean cloth and rub it on the affected area. Leave it to work in for a couple of minutes and then re-run. Give it a couple of minutes more and it should scrape off if it doesn't rub off with the pass of the cloth.
Put some on a clean cloth and rub it on the affected area. Leave it to work in for a couple of minutes and then re-run. Give it a couple of minutes more and it should scrape off if it doesn't rub off with the pass of the cloth.