ChatterBank78 mins ago
Calling All Plumbers! Having A Major Headache Removing An Old Grohe Kitchen Mixer Tap
12 Answers
Hi, all.
I'm changing the kitchen tap (old one is a Grohe mixer tap with hose pull-out) and I already have the new one (another Grohe mixer pull-out).
I've changed taps before, both kitchen and bathroom but this one has got me beat!
I didn't install it, it was installed by the kitchen installers back in 2007.
Normally, there's a vaguely M-shaped metal plate which holds the tap in place above. This is normally secured by a long nut, screwed onto the threaded part of the lower tap. Simples.
This one is driving me nuts (no pun intended).
The M-shaped plate underneath is actually the nut that supports the whole tap, on the threaded down-pipe of the shower-flex itself.
This is to say that there's no nut - the whole M-shaped piece has to turn - and this is the kicker - it can't turn - the 3 solid pipes (cold, hot, and water-out) of the tap itself are blocking the m piece from turning - in either direction. There's not enough room to bend the 3 metal taps out of the way, certainly not without damaging them - but it was installed and this must be un-installable.
I've put pics here to better show the problem, and also a video on my own site, for any super helpful folk to have a look at. I'm so confused; it makes no sense to me!
Many many thanks indeed for any kind folk who can have a look and let me know their thoughts.
Pics:
https:/ /ibb.co /mcfY8P H
https:/ /ibb.co /c2W1NR g
https:/ /ibb.co /hdzH3w F
https:/ /ibb.co /gFppXV T
https:/ /ibb.co /Cw2Ncb F
https:/ /ibb.co /jkWtrq n
Vid:
https:/ /shortu rl.at/i EW02
(this might not be clickable, but works for the vid)
thanks!
Will
I'm changing the kitchen tap (old one is a Grohe mixer tap with hose pull-out) and I already have the new one (another Grohe mixer pull-out).
I've changed taps before, both kitchen and bathroom but this one has got me beat!
I didn't install it, it was installed by the kitchen installers back in 2007.
Normally, there's a vaguely M-shaped metal plate which holds the tap in place above. This is normally secured by a long nut, screwed onto the threaded part of the lower tap. Simples.
This one is driving me nuts (no pun intended).
The M-shaped plate underneath is actually the nut that supports the whole tap, on the threaded down-pipe of the shower-flex itself.
This is to say that there's no nut - the whole M-shaped piece has to turn - and this is the kicker - it can't turn - the 3 solid pipes (cold, hot, and water-out) of the tap itself are blocking the m piece from turning - in either direction. There's not enough room to bend the 3 metal taps out of the way, certainly not without damaging them - but it was installed and this must be un-installable.
I've put pics here to better show the problem, and also a video on my own site, for any super helpful folk to have a look at. I'm so confused; it makes no sense to me!
Many many thanks indeed for any kind folk who can have a look and let me know their thoughts.
Pics:
https:/
https:/
https:/
https:/
https:/
https:/
Vid:
https:/
(this might not be clickable, but works for the vid)
thanks!
Will
Answers
Best Answer
No best answer has yet been selected by BarnaWill. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Should be something like this Will...................
https:/ /www.sc rewfix. com/p/f lexible -tap-ta ils-10m m-x-15m m-x-300 mm-2-pa ck/4565 G?tc=VT 8&d s_rl=12 49404&a mp;gcli d=CjwKC Ajw0Zii BhBKEiw A4PT9z- UuXf5I1 Rwr-T3v _48bRWa tucgVyI 3ce-84j -Q3J2Bh DFKckr- 1KBoCNz IQAvD_B wE& gclsrc= aw.ds
See the small threaded ends at the bottom of the pic. They seal with a small 'o' ring.
https:/
See the small threaded ends at the bottom of the pic. They seal with a small 'o' ring.
Thanks guys, all good advice.
I've found the answer; Grohe got back to me with a model name and number, and I found a video on youtube that shows how it's done.
It unscrews from the top! I've never seen that in any tap designe before. Then again, I'm no plumber.
You simply pull of the top arm (once the shower head and hose have been removed) and then the whole shebang unscrews from the top.
To my mind, completely counter-intuitive, and not helpful of Grohe.
I have the PDF install instructions downloaded as well, and at no point does it show the assembly being screwed in from above, before the arm is pushed on. Blown away.
Thanks for your suggestions, as always.
I've found the answer; Grohe got back to me with a model name and number, and I found a video on youtube that shows how it's done.
It unscrews from the top! I've never seen that in any tap designe before. Then again, I'm no plumber.
You simply pull of the top arm (once the shower head and hose have been removed) and then the whole shebang unscrews from the top.
To my mind, completely counter-intuitive, and not helpful of Grohe.
I have the PDF install instructions downloaded as well, and at no point does it show the assembly being screwed in from above, before the arm is pushed on. Blown away.
Thanks for your suggestions, as always.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.