Home & Garden1 min ago
central heating
Answers
No best answer has yet been selected by KATS. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.This job could be carried out without draining-down the system - you would need to hire a "freezing kit". This could only be used on the proviso that there is enough exposed flow+return pipework to the radiator to fit the freezing clamps.
Should you decide to drain-down your system to carry out the re siting of the radiator, be prepaired to encounter problems - not necessarily with the piping up to the radiator, but eradicating any air-lock problems.This problem may not just involve the resited radiator, but other radiators on the system could become air-locked.
All the above will not apply if your system is "pressurised".
I would strongly advise you to have a heating engineer/plumber carry out the work unless you are a very competent diy'er.