ChatterBank0 min ago
Cold Water Tank Update
Thanks for the answers to my question dated 19/01/06. Several questions were asked in the answers so here are the answers:-
1) I live in a house less than 6 years old.
2) There is one tank in the loft.
3) I have a Albion Mainslow Thermal Store Unit MF 25/140 which stores hot water and the central heating system which is below the loft water tank.
4) There has been no plumbing work since I'veown the property
If its an easy porblem to solve can I do this myself or will I need to call a plumber and or heating engineer?.
Answers
No best answer has yet been selected by andyjc. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.This makes things clearer. As someone conversant with thermal store systems and assuming this is an open vented system your overflow problem is most likely only due to too high a water level in the tank.
This tank is probably the make up or expansion tank and the cold level needs adjusting to be near the bottom to allow for the much larger water expansion in the thermal store without overflowing. Sometimes a standard tank is not big enough.
Your hot water is mains fed through a heat exchanger so it is not affected by the expansion tank. This doesn't rule out a mains back leak in to the tank as EI pointed out but I reckon it's just the tank water level too high.
qapmoc there is no water storage, hot water is direct off the mains through a heat exchanger, the tank is for fill and expansion if this an open vented thermal store.
I can go overland if I only knew where you where, Africa was last mentioned? I want to get them shifted soon as there is oil dripping all over the place!
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.