ChatterBank1 min ago
toilet cistern problem
5 Answers
when we use the push button to flush the toilet we usually hear air escape and the flush was ok. now we hear air and water drips out of the push button. is there anything that can be cleaned/replaced or do we need a new cistern?
Answers
Best Answer
No best answer has yet been selected by handyman1. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.click submit button once and give it time to log your question.
take the lid off the cistern and check how high the water is. it shouldn't be up to the button/handle. if it is the inlet valve needs adjusting.it should be a case of screwing it in by one or two turns. flush the loo then do it before it fills up and see what the new level is.
from what you have said i reacon it works on the water filling the cistern also pressurises the tube with the push button. when you push the button it allows the air to escape which releases the flush mechanism. you will need to see the other end of the tube and mechanism to evaluate why it has water in it and not air pressure.it is most likely what i said before, the water level is to high due to the inlet valve washer wearing slightly.
my water inlet with a float to cut off when full is seperate to the drop valve. my drop valve is very similar to a product at www.screwfix.com catalogue no 43148-80 which shows a variflush drop valve with the push button flush. i would be grateful for any further thoughts.