Quizzes & Puzzles8 mins ago
gas fiires
3 Answers
when i turn on my valor gas fire after the ignition i turn it on full it lights and after a few seconds goes out . any ideas, thanks
Answers
1 to 3 of 3
Best Answer
No best answer has yet been selected by ptrendall. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
ptrendall,
The answer depends on the model of the Valor gas fire,
but possible cause is that the gas supply to the pilot / safety device is partially blocked. This would mean that when the main burner lights, the flame playing on the safety device is " robbed " of pressure, therefore the safety device would shut-off the main burner and the pilot.
You will need the services of a Corgi registered engineer to carry out the remedial work.
Hope this helps.
The answer depends on the model of the Valor gas fire,
but possible cause is that the gas supply to the pilot / safety device is partially blocked. This would mean that when the main burner lights, the flame playing on the safety device is " robbed " of pressure, therefore the safety device would shut-off the main burner and the pilot.
You will need the services of a Corgi registered engineer to carry out the remedial work.
Hope this helps.
1 to 3 of 3
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.