Crosswords0 min ago
Non-flushing toilet
Toilet won't flush - just seems to be a case of no oomph in the handle. Willing to have a go at fixing it but what part do I need?
Answers
Best Answer
No best answer has yet been selected by bearsrule. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Allowing for possible differences in W.C.'s between the U.K. and here n the U.S. and interpolating your question, the first thing to check is the simplest. No "oomph" in the handle sounds to me like the chain connecting the handle to the flush valve. This is the valve that opens to begin the flushing process. The chain can become corroded and break (happens regularly). Take the top lid off (don't drop it... things get unimaginatively expensive with small mistakes). Move the handle while observing the end of it inside the tank. If it is broken, often one can repair it with a paper clip tying the two ends until you can buy a new one (they're inexpensive). If that's not the case, or if your model is different from the one I describe, best to have someone look at it. The system is fairly simple and little can go wrong that can't be fixed easily... usually...
OK... when you look inside the tank, you'll notice a water mark around the inside where the tank has refilled previously. Is the water now reaching that same level? Sometimes the float mechanism doesn't let the tank fill properly and there's not enough water for a proper flush.
Additionally, when you flush the tank the flush valve at the bottom attached to the handle chain should stay up until the tank is almost empty and then flop down sealing the flush drain. Depending on the model, sometimes this valve closes too soon not allowing enough water through. See if all that checks out...
Additionally, when you flush the tank the flush valve at the bottom attached to the handle chain should stay up until the tank is almost empty and then flop down sealing the flush drain. Depending on the model, sometimes this valve closes too soon not allowing enough water through. See if all that checks out...
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.