News1 min ago
changing washer on mixer tap in kitchen
1 Answers
How do I change a washer on a mixer tap in the Kitchen.
Answers
Best Answer
No best answer has yet been selected by phildesign. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.http://www.diyfixit.co.uk/nflash/plumbing/Wash er/washer2.htm
About half way down the page if the leak is at the spout base.
This one if the leak is from the tap itself - you'll know the difference as it's dripping from the water outlet:
http://www.crazysquirrel.com/diy/repair-leakin g-tap.jspx
The most important tips I can give you - under no circumstances throw out the old washer until you've brought it with you to the plumbing supply shop to get a replacement - you'd be amazed how many sizes there are, and they all look alike!
Also, put the plug in the sink hole - it'll stop you losing screws etc down the drain.
About half way down the page if the leak is at the spout base.
This one if the leak is from the tap itself - you'll know the difference as it's dripping from the water outlet:
http://www.crazysquirrel.com/diy/repair-leakin g-tap.jspx
The most important tips I can give you - under no circumstances throw out the old washer until you've brought it with you to the plumbing supply shop to get a replacement - you'd be amazed how many sizes there are, and they all look alike!
Also, put the plug in the sink hole - it'll stop you losing screws etc down the drain.