Quizzes & Puzzles0 min ago
Cavity Wall Insulation
11 Answers
Hi All
We have an integral garage and in the winter the cold that blows up from the garage is unbelievable. It was suggested to put Kingspan boards on the ceiling. My question is would Cavity Wall insulation be as good because the Kingspan is very expensive and would be a lot of hard work. We have phoned the office and she (the receptionist) says they have done it before. Anyone out there that may know.
Thanks in advance
We have an integral garage and in the winter the cold that blows up from the garage is unbelievable. It was suggested to put Kingspan boards on the ceiling. My question is would Cavity Wall insulation be as good because the Kingspan is very expensive and would be a lot of hard work. We have phoned the office and she (the receptionist) says they have done it before. Anyone out there that may know.
Thanks in advance
Answers
Best Answer
No best answer has yet been selected by rosiew. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Kingspan and blown cavity wall insulation is similar stuff - polyurethane foam or similar. Kingspan just has a layer of aluminium reflective foil on the outside, each side.
I'm surprised that you reckon you can get a cavity wall installer to come to shove foam in the ceiling void for less money than you can buy Kingspan or Celotex.
But if that is the case then go for it.
I'm surprised that you reckon you can get a cavity wall installer to come to shove foam in the ceiling void for less money than you can buy Kingspan or Celotex.
But if that is the case then go for it.
I've got the exact same problem... I have a town house with an integral garage, and after last winter I said we will never suffer another. We dont use the garage for car storage, it's more a utility room.
So another one of my jobs before the winter arrives....
Get a pair of french doors of eBay...
Remove the existing steel garage door...
Fit a timber frame in the opening... made from 4'' x 2''
Then fit the doors in the frame...
Clad the exterior in 1'' ply... and then UPVC boards...
Insulate behind the ply and board over on the inside...
It's got to beat a steel garage door any day...!
So another one of my jobs before the winter arrives....
Get a pair of french doors of eBay...
Remove the existing steel garage door...
Fit a timber frame in the opening... made from 4'' x 2''
Then fit the doors in the frame...
Clad the exterior in 1'' ply... and then UPVC boards...
Insulate behind the ply and board over on the inside...
It's got to beat a steel garage door any day...!
Be careful avahalf, the works you are proposing may be subject to planning permission and as your converting it to ''habitable space'' it may require a building notice completing as it will need to
comply with certain insulation regs (u values). Your local
authority planning dept should be very helpful, they usually are.
comply with certain insulation regs (u values). Your local
authority planning dept should be very helpful, they usually are.
Not correct, I'm afriaid, Count.
Whether it is habitable space (or not) only becomes an issue if one is removing the original door between the garage and the rest of the house - otherwise from a Building Control viewpoint, its just a luxury garage, and a non-habitable space. As such it doesn't have to meet thermal or any other of the statutory building regs.
And it won't be a Planning issue either - unless (and this is very unlikely) the planners have an issue with the removal of an off-road car-parking space (by the removal of the space previously available to put a car).
Whether it is habitable space (or not) only becomes an issue if one is removing the original door between the garage and the rest of the house - otherwise from a Building Control viewpoint, its just a luxury garage, and a non-habitable space. As such it doesn't have to meet thermal or any other of the statutory building regs.
And it won't be a Planning issue either - unless (and this is very unlikely) the planners have an issue with the removal of an off-road car-parking space (by the removal of the space previously available to put a car).