Food & Drink2 mins ago
Installing software to a particular HDD
My system has two HDD's on a SATA motherboard, one of those drives is IDE and runs through a converter that I use primarily for storage purposes. It's designation is 'E
When installing new software I am never prompted with an option to install it anywhere other than the default drive 'c containing the OS which is Vista Home basic.
How would I go about installing software to the 'e drive?
Thanks.
When installing new software I am never prompted with an option to install it anywhere other than the default drive 'c containing the OS which is Vista Home basic.
How would I go about installing software to the 'e drive?
Thanks.
Answers
Best Answer
No best answer has yet been selected by Toby570. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.>>>You need to go into BIOS setup to set your route drive to E. Apparently.
What a strange answer (p.s. I assume you mean "root" drive). May apply to perhaps unix/linux but not Windows.
If he sets "E" as his "root" then how is he going to boot into the operating system if E is his boot drive.
Anyway it is probably best to keep your programs on the same drive as your operating system. If you put Windows on one drive, and your programs on another, and one of the drives fails for some reason, you will have a huge problem sorting out the mess.
If Windows and all your programs are on the same drive you can then take an "image" of your drive with some backup software and store it on an external drive. It is then much easier to restore everything from that image as everyting is one the one drive.
So basically install Windows and all your programs on the same drive.
p.s. Many programs have a default or simple path to take the default install but there is usually an option like "Advanced" or something like that during the install to allow you to change the drive, or folder, where the product is to be installed (and other install options). Very rare for a program not to have that option.
What a strange answer (p.s. I assume you mean "root" drive). May apply to perhaps unix/linux but not Windows.
If he sets "E" as his "root" then how is he going to boot into the operating system if E is his boot drive.
Anyway it is probably best to keep your programs on the same drive as your operating system. If you put Windows on one drive, and your programs on another, and one of the drives fails for some reason, you will have a huge problem sorting out the mess.
If Windows and all your programs are on the same drive you can then take an "image" of your drive with some backup software and store it on an external drive. It is then much easier to restore everything from that image as everyting is one the one drive.
So basically install Windows and all your programs on the same drive.
p.s. Many programs have a default or simple path to take the default install but there is usually an option like "Advanced" or something like that during the install to allow you to change the drive, or folder, where the product is to be installed (and other install options). Very rare for a program not to have that option.
> Anyway it is probably best to keep your programs on the same drive as your operating system.
I doubt many IT professionals would agree with that, especially when it comes to servers.
> If you put Windows on one drive, and your programs on another, and one of the drives fails for some reason, you will have a huge problem sorting out the mess.
Only if it's the disk with the OS on it which has failed!
> If Windows and all your programs are on the same drive you can then take an "image" of your drive with some backup software and store it on an external drive. It is then much easier to restore everything from that image as everything is one the one drive.
That is simply untrue! Restore the OS partition and then restore the application software partition. At the most, that represents a few more mouse clicks.
I doubt many IT professionals would agree with that, especially when it comes to servers.
> If you put Windows on one drive, and your programs on another, and one of the drives fails for some reason, you will have a huge problem sorting out the mess.
Only if it's the disk with the OS on it which has failed!
> If Windows and all your programs are on the same drive you can then take an "image" of your drive with some backup software and store it on an external drive. It is then much easier to restore everything from that image as everything is one the one drive.
That is simply untrue! Restore the OS partition and then restore the application software partition. At the most, that represents a few more mouse clicks.
It's always worth paying good attention to every screen you see during any program install. By paying attention you can drastically reduce the amount of crap installed on your system as a lot of programs try and install other bits you don't need (such as browser toolbars) and there will almost always be a box to uncheck that will stop the extra crap from being installed.
>>>Only if it's the disk with the OS on it which has failed!
Well if the disk with all the programs on it fails you will have a copy of Windows with loads of entries pointing to a drive which has no programs on it.
After replacing the "programs" drive I assume that will take as long to sort out as if the Windows disk fails.
And I still say for most home user having Windows and all your programs on the same disk makes most sense.
Well if the disk with all the programs on it fails you will have a copy of Windows with loads of entries pointing to a drive which has no programs on it.
After replacing the "programs" drive I assume that will take as long to sort out as if the Windows disk fails.
And I still say for most home user having Windows and all your programs on the same disk makes most sense.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.