Crosswords5 mins ago
Zanussi Zwd16270 W1 (Washer Dryer)
14 Answers
Finished cycle, and the door won't open.
Any ideas?
Any ideas?
Answers
1 to 14 of 14
Best Answer
No best answer has yet been selected by Daij. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Their manual suggests it needs a re-spin because there's still water in it. I had a Hotpoint that used to do this and it drove me mad - the spin vibration would make a part in the release mechanism come loose and I had to take the back off the machine and release it by hand (until I complained and got a replacement). I've never bought a Hotpoint since.
That was my next suggestion Prudie.
It could be that there's some water left in the drum, so it needs to respin to empty it.
It could be down to a blocked filter, or some other fault, or it could be some glich that happens every now and again and won't need remedial work.
Just try respinning and see if that helps :)
It could be that there's some water left in the drum, so it needs to respin to empty it.
It could be down to a blocked filter, or some other fault, or it could be some glich that happens every now and again and won't need remedial work.
Just try respinning and see if that helps :)
Just in case you don't have it here is the manual
http://
Try what Giz says, check the drain pipe is clear and the drain pump not clogged. So will it not spin at all?
http://
Try what Giz says, check the drain pipe is clear and the drain pump not clogged. So will it not spin at all?
1 to 14 of 14
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.