Body & Soul0 min ago
Gas Heating In The Home
11 Answers
What is your thermostat set at for your heating to come on in your home ,is there a temperature that is recommended as healthy in Winter conditions.
Do you switch on your Gas fire or turn on your central heating to take the chill off.
Typing in mittens
In A Mo
Do you switch on your Gas fire or turn on your central heating to take the chill off.
Typing in mittens
In A Mo
Answers
Best Answer
No best answer has yet been selected by in a mo. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Our room thermostat is set on approx. 19 deg Centigrade during the day, and it is turned down to approx. 18 deg during the night. A healthy temperature? Do what feels right. Our heating is on 24/7, but then, we are retired, so home all day. When we were working, we found (by scientific research) that leaving the heating on 24/7, but turning it down when we were out, was more economical than having it come on twice a day.
Downstairs, ie Lounge, Hallway and Kitchen etc the temperature is set at about 19-20C
Upstairs Bedrooms are set very low/off because neither of us can sleep if it gets too warm, we rely on Duvets to keep us warm when asleep. Bedroom doors are kept shut at all times.
All our radiators have thermostatic valves other than the bathroom one which is permanently open.
CH boiler is set to start at 6:30am and finish at 11pm.
If it gets a bit chilly then gas fire gets switched on. I do not feel the cold as much as the OH and if she's out I'll lower the temperatures downstairs.
Unfortunately, I tend to forget this and get moaned at when she comes back in again ☺☺☺
Upstairs Bedrooms are set very low/off because neither of us can sleep if it gets too warm, we rely on Duvets to keep us warm when asleep. Bedroom doors are kept shut at all times.
All our radiators have thermostatic valves other than the bathroom one which is permanently open.
CH boiler is set to start at 6:30am and finish at 11pm.
If it gets a bit chilly then gas fire gets switched on. I do not feel the cold as much as the OH and if she's out I'll lower the temperatures downstairs.
Unfortunately, I tend to forget this and get moaned at when she comes back in again ☺☺☺
The thermostat is always set to max as it is an unwanted control anyway. The individual radiators are set to whatever makes the rooms comfortable.
Some authority insisting one has to set a thermostat to some cold level to win their approval know what they can do with their advice.
I have left turning on the heating quite late this year as i am trying to save money, it only went on midnight last Sunday/Monday. Now it is on, it will remain on the timer until the weather gets warm again, except for periods away from home.
Some authority insisting one has to set a thermostat to some cold level to win their approval know what they can do with their advice.
I have left turning on the heating quite late this year as i am trying to save money, it only went on midnight last Sunday/Monday. Now it is on, it will remain on the timer until the weather gets warm again, except for periods away from home.
Picking up on Og's post, the basic roomstat is the crudest of controls. It covers only one "zone" and nothing else. It simply turns the circulation pump on when the temp. falls below your setting. Other rooms might be calling for heat, but this will be ignored until a time when the roomstat senses its trigger point.
Up to only a few years ago, it was quite normal to not fit one at all. It was made mandatory by Building Regs, in an attempt to save money on heating bills.
Circulation pumps are designed for 24/7 operation. Having it shut off every now and then simply makes it much more difficult to control each room or zone efficiently.
TRVs on each rad (thermostatic rad valves) give individual control. That's much more desirable, giving "local" control without any overall interference from an arbitary roomstat setting.
Up to only a few years ago, it was quite normal to not fit one at all. It was made mandatory by Building Regs, in an attempt to save money on heating bills.
Circulation pumps are designed for 24/7 operation. Having it shut off every now and then simply makes it much more difficult to control each room or zone efficiently.
TRVs on each rad (thermostatic rad valves) give individual control. That's much more desirable, giving "local" control without any overall interference from an arbitary roomstat setting.