Glowworm Fuel Saver F boiler

Hannahb | 19:57 Tue 09th May 2006 | How it Works

1 Answers

We removed a radiator to paint a wall then replaced it. Later our ageing Glowworm Fuel Saver F boiler started making lots of banging noises and now the pilot light has gone out. How can we re-light it? - there doesn't appear to be a way to do it manually

how to polish bone version two

Changing locks

Answers

Only 1 answer

Best Answer

No best answer has yet been selected by Hannahb. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

Jessalyn

Sounds like you have an air-lock and you might need to bleed the radiators - use a small brass key you can get from a hardware store. Let the air out until the radiator refills and water starts comming out. Then close it tight again. Re-lighting the pilot should be by spark from pressing a button in and holding it there for a count of 20. Sorry, I have no idea how to re-light on if it hasn't got an ignition switch. A good heating engineer should be able to fix it.
Good luck

Only 1 answer

Do you know the answer?