ChatterBank12 mins ago
Petrol in Diesel Vauxhall Vectra
I stupidly filled up my company Vauxhall Vectra 1.9 CDTi 56 plate with petrol.
The car was well into the red so i filled it up to the top with V power petrol thinking it was Diesel. The tank is 9 / 10 filled with petrol. I then drove it for about 2 miles when i noticed it wasn't running right, i pulled over and then it hit me what i had done.
Am i able to totally drain the tank and fill it up with Diesel ? or is this going to cost me ?
The car was well into the red so i filled it up to the top with V power petrol thinking it was Diesel. The tank is 9 / 10 filled with petrol. I then drove it for about 2 miles when i noticed it wasn't running right, i pulled over and then it hit me what i had done.
Am i able to totally drain the tank and fill it up with Diesel ? or is this going to cost me ?
Answers
Best Answer
No best answer has yet been selected by stanmech. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.the high pressure fuel pump gets its lubrication from the diesel fuel itself, without that effect the case hardened components become soft and disintegrate into swarf.
at best, properly flushing the entire fuel system could cost you �5k. at worst you'll need to replace the fuel pump, and possibly other components if any swarf has contaminated them - in which case prepare to spend �12k.
generally, mis-fuelling isn't covered by insurance.
at best, properly flushing the entire fuel system could cost you �5k. at worst you'll need to replace the fuel pump, and possibly other components if any swarf has contaminated them - in which case prepare to spend �12k.
generally, mis-fuelling isn't covered by insurance.
�5k and �12k!!??? i dont know what garage you go to mate but i think i would change, it really depends on how much petrol has got up to the fuel pump and injectors, you wont know what damage,if any, has been done until its drained of petrol and then re-filled with diesel and see if it will run/start properly