Donate SIGN UP

Whirlpool Datid PRO D10 AN

Avatar Image
jaycee401 | 11:57 Sun 26th Jul 2009 | How it Works
8 Answers
We are wanting a Whirlpool 90 x 60 cooker from Ikea does anybody know if this will run off a normal 13amp plug, the write up says Oven 103L energy consumption with a standard load top and base heating 1.38kWh/forced air 1.42 kWh. thanks
Gravatar

Answers

1 to 8 of 8rss feed

Best Answer

No best answer has yet been selected by jaycee401. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
electric cookers normally require a 30A feed and a fused rdc

Ikea says
0 matches for "Whirlpool Datid PRO D10 AN"

so no idea
Question Author
HI, sorry my mistake not whirlpool its DATID PRO D10 AN
0 matches for "DATID PRO D10 AN" either

you're going to need an electrician unless it uses a 100w bulb
As long as the unit is rated at 3kW or under, a 13 Amp plug should do fine, though it would be good to know the correct make and model number for us to give a definitive answer.
To put ACtheTROLL out of his/her misery, do you have an IKEA catalogue number?
Looking at the IKEA catalogue, the particular model you indicated does not appear, BUT I strongly suspect you may be talking about a microwave oven, in which case a 13 Amp plug will be fine.
Anything with a double oven and/or grill will definitely need installation by a qualified electrician with the 30 Amp fused rdc, as ACtheTROLL suggested.
Just found your oven on another site.
No, a 13 Amp plug will not be sufficient.
Get an electrician.
phew!
well done rcc
Question Author
thanks folks, electrician called today and yep 13amp is all it needs, as least it gave you all somthing to do on a wet sunday afternoon, :) thanks again

1 to 8 of 8rss feed

Do you know the answer?

Whirlpool Datid PRO D10 AN

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.