Motoring8 mins ago
DIY tinted windows
I'm thinking of buying a roll of tint film from eBay to put on my car window. Is it an easy thing to do? Anyone with any advice?
Answers
Best Answer
No best answer has yet been selected by Beswad. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I watched a crime programme only last week, which showed a 4x4 driver being pulled up by the police & asked her to peel off the tinted film on the front windows.
She didn't want to do this herself in case she scratched them, so called her husband to do it. If he'd have refused, the police office was going to nick him - so he did.
I would do as mrs_o suggests & look into it first.
She didn't want to do this herself in case she scratched them, so called her husband to do it. If he'd have refused, the police office was going to nick him - so he did.
I would do as mrs_o suggests & look into it first.
Since March 2004 regulations have existed that effectively ban any heavy tinting of the windscreen and front windows. The front side windows need to let in 70% of the available light in order for the tint to be legal. The windscreen must let in 75% of the available light in in order for the tint to be legal. For the rear windows no limitations apply.
To do it properly you would need to remove the windows before applying the film...if you dont fit the film below the point where the rubber seal ( on the inside) presses on the window....the film will definitely catch on the seal every time you wind the window down...and will soon look a total mess.
If you are going ahead... clean your windows ...mix a little detergent with water in a spray bottle...soak the window with the mix, and lay the film on it ..( you can't have too much water)...and now spray the film...
Get a squeegee and starting at the centre, draw the squeegee out to the edge...do this all round until all the bubbles have been removed.....then get a razor blade and trim the excess film... finally re-fit window in door.
If you are thinking of doing your rear screen...beware...any curve in the glass makes it much more difficult.
If you are going ahead... clean your windows ...mix a little detergent with water in a spray bottle...soak the window with the mix, and lay the film on it ..( you can't have too much water)...and now spray the film...
Get a squeegee and starting at the centre, draw the squeegee out to the edge...do this all round until all the bubbles have been removed.....then get a razor blade and trim the excess film... finally re-fit window in door.
If you are thinking of doing your rear screen...beware...any curve in the glass makes it much more difficult.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.