Toyota Corolla (Ecu)

iggymiggy | 14:08 Mon 04th Aug 2014 | Motoring

4 Answers

I have a Toyota Corolla 1332CC. The ECU is not working. The crank position senor has been changed and it still does not work. Can it be exchanged for another ECU from another vehicle?

Bmw Electric Hood Wont Close Or Open

Citreon Ds3 V 2.0 Tdi Vauxhall Insignia

Answers

1 to 4 of 4

Best Answer

No best answer has yet been selected by iggymiggy. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

TWR

1st, remove the ECU Plug fire some WD40 on the connector pins & re-connect & Try, each ECU Is programed to each car & it's parts, I would look at the Web>> Ebay to see if the unit can be repaired, have you got water into the unit? there are people out there that can repair these units, make an effort to look on the web in your area, ( What is your are?

iggymiggy

Question Author

Bridgend S wales

TWR

Regards your latest post, If you look on the Web for Toyota Breakers in your area they should come up with a few Scrap yards etc, what is the cars problems apart from what you have posted? Have you tried what I posted?

pauln90

I used the following last year to sort out a failed ecu on a Citroen C2
http://www.cartechelectronics.com/

Have the car tested on the diagnostics to prove the ecu is at fault. You could then have it tested to see if it can be repaired. If it's beyond repair then make a note of all the serial numbers/part numbers on your ecu to ensure that you order the right part. The firm I used transferred all the data on my ecu onto a working second hand unit and it worked perfectly. It took about 5 days from posting it off to getting the replacement. Oh and I have absolutely no connection with this firm but they did a good job for me.

1 to 4 of 4

Do you know the answer?