rover radio key code entry

[Clippy]

I have just had the car back from the garage and the battery has been replaced, thus I have a dead radio. I have the keycode, but no instruction manual, and to compound the issue, the LCD screen has been dead since I got the car. Can anyone help me in inputing the key code so I can get some sounds back on my trawl to work... Ta very muh y'all ... Clippy

[Carol Anne]

Look back here after 9pm and I'll bring the manual home with me.

[Clippy]

Hey thanks Carol, I will !

[Carol Anne]

Ok Clippy, lets eeif this will work for you

Switch on the radio- 'Code' (would appear in the display) Press preset button 1.

Press one of the two tuning buttons < > to select the first digit of the security code. ie. press once for one or twice for two.

Press preset button 1 to store the first digit in the unit's memory.

Use either < > tuning button to select the second digit of the code.

Press preset button 1 to store the second digit.

Select the third digit, again using the tuning buttons.

Press preset button 1 to store the third digit.

Select the final digit. Pres preset button 1 to store the final digit.

If the correct code has been entered, a double two-tone bleep will be heard and the radio will operate.

If an incorrect code is entered a warning tone will sound and the time delay period commences. DO NOT switch off, wait ten mins and try again. Good luck

[Clippy]

Thank you Carol for ur time and effort, I shall give this a go tonight, and let you know . ur a star cheers

[Clippy]

Hell Carol does the manual give any indication as to whether the 1st indicated digit is a 0 or a 1. My code has a zero in it ? do i scroll through past nine or start at 0 cheers

[Carol Anne]

Looks as if we've got different radios. These instructions only allow input of digits 1 - 9. (model R960)

If you try a dealership they might be able to pull up the info on their database, without you having to buy a new manual, which classed as a part would no doubt cost more than a new set! Worth a try at least.