ChatterBank1 min ago
Answers
1 to 2 of 2
Best Answer
No best answer has yet been selected by ern8888. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Hi
You can buy a specifically shaped drill to allow you to drill into the spotwelds (half way through only) this is easy on the top of the wing, but all other areas unless bolted are difficult to reach ie remove door,otherwise remove the bulk of the wing with a chisel leaving the welded parts then grind or drill the remaining spotwelds off, so you can offer up the new panel,
you may be able to drill & bolt on the new wing,or get somebody to weld it for you,
painting is another problem.
have fun;
i hope this is of help!
You can buy a specifically shaped drill to allow you to drill into the spotwelds (half way through only) this is easy on the top of the wing, but all other areas unless bolted are difficult to reach ie remove door,otherwise remove the bulk of the wing with a chisel leaving the welded parts then grind or drill the remaining spotwelds off, so you can offer up the new panel,
you may be able to drill & bolt on the new wing,or get somebody to weld it for you,
painting is another problem.
have fun;
i hope this is of help!
1 to 2 of 2
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.