Donate SIGN UP

Rover Engine

Avatar Image
woodchopper | 13:15 Sun 05th Dec 2010 | Cars
2 Answers
I have a Kit Car fitted with the rover 2L DOHC T -series engine.
It has an intermittent fault in that when I am driving the car when I take my foot off the accelerator pedal the car does not slow down.When this happens when I'm driving I put the clutch in turn the engine off and restart and the fault disappears immediately only to re-appear later.
What can be the cause ? - i've been told it could be the throttle sticking but I have looked at the throttle body and cant see it sticking. And have ben told an air leak into the manifold can cause the engine not to lose rpm but why does this fault reset when the engine is restarted ?
There was a small air leak between the throttle body and inlet manifold but I replaced the flexible gaket and it is now air tight.
Is there anyone on here that knows these engines like the back of their hand that could shed some light on the problem ?

Is it possible the butterfly valve can stick open even though the throttle linkage is back to rest position?
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by woodchopper. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Worth searching/asking here...........

http://forums.mg-rove...php?searchid=11247957
This has a MAF (flowmeter) or a MAP sensor?
These been checked (whichever it uses)?

1 to 2 of 2rss feed

Do you know the answer?

Rover Engine

Answer Question >>