high lift cam in a quadzilla 300 XLC

goody111 | 13:21 Sun 13th Apr 2008 | Other Vehicles

1 Answers

I have had a high lift cam fitted to my quadzilla 300 XLC (SMC engine) It has had all neccessary modifications e.g bigger jet in carb, performance exhaust and air filter but it won't run. Can anybody give me any reason as why this is so? I've been told that the cam timing and valve clearances do not have to be altered. How about spark plugs, should these be different as when I turn the engine over it still sparks?
Please help.... DESPERATE!!!

RAF Jets

scooters

Answers

Only 1 answer

Best Answer

No best answer has yet been selected by goody111. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

Tony99

you have to make sure that the high lift cam can rotate freely, as it may be to large. i also had a simular prob when fitting a high lift cam, all i did was increase the size of the holes where the high lift cam sits. you could file them out or take it to a garage.

Only 1 answer

Do you know the answer?