Pull off black surround, undo the two torx screws and gently pull fwd. Only two connectors on rear, which are colour coded, blue one on left and black on right. Ensure ignition is OFF, to release press tab and moved locking lever to right. Pull off connecter.
All bulbs are held in small holders (grey) which are released by a quarter turn. They are recessed and you may need to use long nose pliers. Test bulbs with meter or hold up to light and if discoloured they are most likely gone. Pull bulb from holder and fit new one. Insert holder, quarter turn to lock. Offer up the pod and refit the connectes, When connector is seated, lift locking lever to left. Refit pod.
Insert key and switch on ignition check that all lights operate. If they do reft screws and black surround. If they don't, try again or check that all connectors are home. DO NOT REMOVE CONNECTORS WITH IGNITION ON.Reset date and time etc using the book symbol and arrow keys to right of pod.Type used is RW286 12V 1.2W Capless
Al.