Quizzes & Puzzles1 min ago
can abs light fail mot?
I have a vauxhall vectra 1999 and just had it put through an mot and it failed on abs warning light staying on but yet brakes are perfect any suggestions how i can solve this problem before the retest?
Answers
Best Answer
No best answer has yet been selected by crewie. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.nickyandlee,dont talk such nonsense,if the abs light is on,then there is a problem with the abs,vauxhall cant just reset it for the sake of resetting it,the problem needs sorting and the light will go out on its own,
crewie,do as furrycheeky says and check for wires,etc,give the brakes a good clean up,then go from there,i doubt it would cost a fortune to get fixed.
crewie,do as furrycheeky says and check for wires,etc,give the brakes a good clean up,then go from there,i doubt it would cost a fortune to get fixed.
Because the memory in the car can store old faults it's best to have a garage erase the error in the memory and then run it round the block. If the ABS light comes back on the faults shown are the ones that are present.
On some vehicles something minor like a brake pedal switch or brake light bulb out can make the ABS light come on, but not normally on Vectra's.
On some vehicles something minor like a brake pedal switch or brake light bulb out can make the ABS light come on, but not normally on Vectra's.