News5 mins ago
Austin Mini ignition barrel removal
How can I take off a mini ignition barrel? It seems to be fitted by two bolt in studs with nothing to turn them!
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by JonnyR. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
i believe these were special bolts, ahh, bless 'em.
they had a thin shaft section below the head which , when tightened up enough , snapped off. this left the bolt and shank in place and it has to be drilled or hacksawed.
look closly at the top of the bolt and you should see where the head has snapped off.
if there is room and there is a gap between to two halfs of the barrel clamp, it is best to saw through and the bolt will come out fairly easily.
if you have to drill, make sure you get it dead center.use a center punch accurately.
good luck.
they had a thin shaft section below the head which , when tightened up enough , snapped off. this left the bolt and shank in place and it has to be drilled or hacksawed.
look closly at the top of the bolt and you should see where the head has snapped off.
if there is room and there is a gap between to two halfs of the barrel clamp, it is best to saw through and the bolt will come out fairly easily.
if you have to drill, make sure you get it dead center.use a center punch accurately.
good luck.
Only 1 answer
Latest Posts
Recession Risk As Britain Reels From...
News6 mins ago
Crosswords13 mins ago
ChatterBank21 mins ago
ChatterBank23 mins ago
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.