News3 mins ago
Automatic Car Procedure
Is this the correct procedure when driving in an automatic car? For stopping: Apply footbrake until stopped, when stopped select neutral, handbrake on and release footbrake. Setting off: Apply footbrake, select drive, and handbrake off?
Answers
Best Answer
No best answer has yet been selected by NC68. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
can be a bit risky depending on gear box, sometimes they go from neutral to drive and from park to reverse...the danger is putting it in park, thinking its in neutral when ready to go..drop it back one to drive but end up putting it into reverse , flooring it (as you do) and reversing into the car behind !! believe me it happens
-- answer removed --
Depends on how long you stop for. The DSA (who run the Driving Test) recommend that in an auto you apply the h/b when you stop. In real life, if you have a "temporary" stop, just up to 30 secs or so, then hold it on the f/b unless on an exceptionally steep incline. For "extended" stops, say lights with a regular time pattern or pedestrian phases, then use h/b (if needed) & "N" to save heating up the torque converter neeedlessly & saving a small amount of fuel.